Flash File Samsung GT-i9003 Galaxy SL
You don’t need any flash tool or Computer or any other USB drivers to flash the firmware of Samsung GT-i9003 Galaxy SL with this method. You need just a flash file.
Follow these steps to flash stock firmware with recovery mode.
Method 1
- First, download the flash file.
- Next, Move the Firmware file to SD card storage ( Do not put the file in the folder).
- Remove SD card from the phone.
- Power off your Samsung GT-i9003 Galaxy SL, by holding the power button.
- Hold down the
- Volume Up + Bixby + PowerButton
- Volume Up + Home + PowerButton
- Volume Up + PowerButton
- Afterward, use the Volume Buttons to select option YES and press Power button to confirm.
- Finally, select the reboot system now option.
- Now insert the sd card. And again go to the recovery mode.
- Then select Apply update from SD card option.
- Now Locate Downloaded Firmware file from Storage.
- After that, Tap on the Firmware file and install it.
- You have successfully flash the Firmware.
Method – 2
- First, download the flash file.
- Next, Move the Firmware file to SD card storage ( Do not put the file in the folder).
- Remove SD card from the phone.
- Power off your mobile By holding the power button.
- Hold down the
- Volume Up + Bixby + PowerButton
- Volume Up + Home + PowerButton
- Volume Up + PowerButton
- Now, Insert SD card now.
- After that, Locate Downloaded Firmware file from Storage.
- Finally, Tap on the Firmware file and install it.